|
Ar kurjeru visā Latvijā
|
You will be contacted about delivery time. | From 4,99 EUR |
Read more
| Type | Torch |
| Power, W | 82; 82000 |
| Length, mm | 1385 |
| Hose length, m | 5 |
| Application temperature, ° C | 1500 — 1800 |
| Gas consumption (average), g \ / h | 5900 |
| Gas | Butaan |
| Nozzle size, mm | 60 |
| Diameter, mm | 60 |
| Töörõhk, Mpa | 0.25 |
| Flame temperature, ˚C | 1500~1800; 1500 — 1800 |
The VOREL DUAL ROOF HEATING TORCH (model code: 73343) is a professional-grade roofing burner designed for working with heat-sealed roofing felt across large areas. Its extended length allows users to work in a standing position, offering high thermal efficiency with two burners to accelerate the process significantly.
Equipped with a special valve on the handle, this torch effectively shuts off the gas supply when placed down, resulting in considerable savings on gas consumption.
This gas burner is ideal for various applications including soldering, heating, drying, and roofing work. It operates with butane from external cylinders and can also accommodate a propane-butane gas mixture, making it suitable for locations without direct energy sources.
Usage Applications:
Package Contents:
Instructions for Use:
To set up the device, refer to the instruction manual. First, secure the hose to the burner assembly and the other end to the gas cylinder.
Before igniting, check the tightness of connections by slightly opening the cylinder valve and applying soapy water. If bubbles appear, turn off the gas supply, tighten the leaking connections, and repeat until all connections are gas-tight.
When ready to ignite, open the appliance valve enough to allow gas to flow, then light the gas at the nozzle using a suitable lighter designed for portable gas burners. After about 20 seconds, you can press the burner lever. Adjust the gas pressure with the burner valve if the flame appears too short. The flame will return to economy mode upon releasing the lever.
After finishing work, close the cylinder valve, and once the flame is extinguished, place the burner on a non-flammable surface to cool down. Perform maintenance once cooled.
For detailed installation, operation, and maintenance procedures, refer to the included instruction manual.
Usage Warnings:
The device should be used exclusively with reusable containers of technical butane gas equipped with a threaded connector. Always work in well-ventilated areas. Be sure to read the instructions thoroughly before use.
