Digital Outside Micrometer 0-25Mm/0.01Mm YT-72305 YATO

Digital Outside Micrometer 0-25mm YT-72305 by YATO is an essential tool for measuring small objects with precision. Its advanced features and user-friendly design make it ideal for professionals and hobbyists alike.

• Measuring range: 0 - 25 mm
• Resolution: 0.001 mm / 0.00005 inches
• Accuracy: ±0.002 mm / ±0.0001 inch
• Measuring force: 5 - 10 N
• Display: Liquid crystal LCD display
• Current consumption: ≤ 35 μA
• Power supply: one 1.55V silver battery, type SR44
• Operating temperature: 5°C - 40°C / 41°F - 104°F
• Storage temperature: -20°C - 60°C / -4°F ÷ 140°F
• Humidity effects: Negligible below 80% relative humidity
• Designed for precise measurements and easy reading from 0 to 25 mm

Preparation for Operation:

• Clean the measuring surfaces and the guide with a cotton cloth. Avoid using solvents or acids.
• Check the zero position by bringing the measuring surfaces into contact using the friction clutch knob. Then, press and hold the ON/OFF—SET button for about 2 seconds until the indication is zeroed.
• Ensure all buttons, switches, and the display are functioning properly.

Basic Measurement Methods:

1. Absolute Measurement

• Loosen the locking clamp.
• Turn on the device by pressing the "ON" button.
• Select the measurement unit by pressing and holding the "ABS/INC—UNIT" button for about 2 seconds.
• The measurement result alternates between inches and millimeters on the display.
• Inches are indicated by the "in" symbol on the display.
• Press the "ABS/INC—UNIT" button until the "ABS" symbol appears.
• Spread the measuring surfaces slightly wider than the object.
• Adjust the stylus knob and tighten with the friction clutch knob until it engages.
• Read the measurement from the display.

1. Relative Measurement

• The method is similar to absolute measurement but is used to compare two dimensions.
• Pressing the "ABS/INC—UNIT" button resets the indication to zero, showing the "INC" symbol.
• The difference in dimensions can be read after measuring again.

The micrometer features a steel ball in a rubber mount for measuring parts with small surfaces. After attachment, the indication should be zeroed as described above.

Note: It is recommended to mount the measured element of the micrometer before starting measurement to achieve the highest accuracy. Multiple measurements are also recommended to obtain an arithmetic average of the results.

• Series: GRD
• Measuring range: 0-25 mm
• Consistency: 5-10 N
• Material: Carbon steel, aluminum, PVC
• Metric scale: Yes
• Inch scale: Yes
• Reading type: Electronic
• Display type: Liquid crystal LCD
• Power supply: Battery
• Cell type: 1.55V; SR44
• Power consumption on standby: ≤35 μA
• Working temperature range: 5~40 ˚C
• Storage temperature: -20 ~ +60 ˚C