|
|
Ar kurjeru visā Latvijā
|
You will be contacted about delivery time. | |
|
|
|||
|
|
Piegādes punktos
|
You will be contacted about delivery time. | |
Read more
Ten-pack: this set contains 10 kg of coconut activated carbon for 600 L with a granulation of 0.55 - 2.4 mm, adsorption activity > 60%, used for purification, taste and odor correction of water and alcohol.
Coconut activated carbon is specially selected and subjected to thermal treatment with steam of coconut shells, which allows you to neutralize and harmonize the taste and smell of distillates. Due to its iodine number (>900 mg/g) and granulation (0.55 - 2.4 mm), this carbon has a large pore volume and, consequently, a high capacity for adsorbing impurities affecting the color, taste, and smell of liquids. Tests show that using coconut activated carbon yields much better results than the same process with coal. Filtration in the column occurs seamlessly, the distillate flows evenly, filling the entire medium, and the resulting distillate has a normalized mild aroma and delicate taste free from yeast smell. One 1 kg package allows for the filtration of up to 60 L of liquid. The product has a low ash content (<3%), ensuring no "leaching" during filtration, thus preventing contamination and negative impact on the taste of fluids. Due to its versatile application, carbon can also be used outside of distillation - in gardening, as a filtering layer in pots, and during the creation of terrariums.</p>
Key features of a single package:
The proposed set includes ten packages of coconut activated carbon.
Directions for use:
Place the carbon on a sieve, rinse it with hot water from a kettle, then place the carbon on the sieve under running tap water (approx. 20°C) and wash the carbon for about 3 minutes, turning it on the sieve until the water running through is clear. Then leave the carbon to drain excess water. After this time, the carbon is ready for use. The principle of using activated carbon is similar to that employed in standard water filters. The flow time for 1 L of fluid through the medium should be at least 1 hour (the effectiveness of adsorption of unwanted substances depends on the contact time of the fluid with the absorbent). Alternatively, activated carbon can be placed in a nylon mesh and put directly into the container with the fluid being purified for not less than 6 hours, stirring regularly. The effectiveness of the carbon also depends on the fluid temperature. Elevated temperature does not favor adsorption - the optimal temperature for the absorption process is 10°C.
Ingredients: coconut activated carbon.
Dimensions of a single package:
The regulation of alcoholic beverages in Poland is governed by the laws: dated 02.03.2001 on the production of ethyl alcohol and the manufacture of tobacco products; dated 12.05.2011 on the production and bottling of wine products, the trade in these products, and the organization of the wine market; and dated 18.10.2006 on the production of spirit drinks and the registration and protection of geographical indications of spirit drinks. BROWIN Sp. z o. o. Sp. k. is not responsible for the use of its products in violation of applicable laws.