Introducing the HawkStill Distiller "Cold Fingers" 60 L from BROWIN, an outstanding distillation solution designed for both professionals and hobbyists. This efficient set, with its insulated container, ensures exceptional results while being user-friendly for less experienced individuals.
HawkStill "Cold Fingers" Distiller 60 L is part of a premium line of distillers featuring electric modules and a highly efficient column with a diameter of 60.3 mm. This professional-grade distiller includes a spacious insulated container (60 L) with a secure lid, a "Cold Fingers" reflux, and a condenser. If you are looking for a complete set made from high-quality stainless steel components, equipped with easy-to-use modules and delivering excellent results, be sure to check out the HawkStill!
It is designed to be used with a heater that has a total power of 3500 W.
What sets our HawkStill "Cold Fingers" distiller apart?
- High efficiency - The design of this modular distiller, featuring a 60-liter container and a column with an appropriate diameter, allows for the effective distillation of large volumes of liquid (it is recommended not to exceed 90% of the capacity).
- High quality - This distiller combines the advantages of stainless steel (INOX) with durability, tight seals, precise connections, and long-lasting components.
- Column with an outer diameter of 60.3 mm - Optimizes process efficiency. The column is divided into two modules: the catalyst filled with copper springs removes sulfur compounds from the distillate, while the second connector filled with stainless steel scrubbers enhances the strength and purity of the distillate.
- "Cold Fingers" reflux - Functions as a dephlegmator; with precise water flow regulation, it effectively pre-cleans the distillate vapors. You can adjust the amount of distillate returning to the filling, controlling its strength, purity, and aroma.
- Insulated neoprene-covered container with a dome lid - The container is sealed with a tight dome lid (Convex type), which ensures safe handling of any foaming mash or wort, increases system stability, and positively influences the entire distillation process. The removable lid simplifies the use and cleaning of the container. The tank and lid insulation optimize the process, speed up heating, and protect against accidental contact with the hot tank.
- Complete set - The set includes everything you need: a container with a dome lid and insulating cover, a column with reflux, a condenser, a ball valve, 2 electronic thermometers with probes, 2 hoses, a water supply connector, 2 sets of Tri-Clamp clamps with gaskets, stainless steel filling, sealing Teflon tape, assembly components, and user instructions.
The functionality of the set is enhanced with the following elements:
- Two column connectors - Act as a rectifier, enhancing the purity of the distillate.
- Tri-Clamp connectors - Facilitate the assembly of individual modules for quick and comfortable setup.
- Column insulation - Reduces heat loss, enabling the process to be conducted at lower ambient temperatures.
- 2 electronic frame thermometers - Provide accurate temperature readings during the distillation process.
- Heater with a total power of 3500 W (1500 and 2000 W) - Ensures optimal temperature control.
- Removable lid allows for thorough tank cleaning, convenient pouring of contents, and when assembling the distiller, some elements can be stored inside the container, minimizing storage space requirements.
The container, head, reflux, and column connectors are made of stainless steel (INOX).
SET ELEMENTS:
- Convex type container with a capacity of 60 L
- Column connector (2 pcs., catalyst 24 cm, column 100 cm)
- "Cold Fingers" reflux
- Head with condenser
- Electronic frame thermometer with probe (2 pcs.)
- Neoprene cover for insulating the container with lid
- Column insulation made of polyethylene (2 pcs.)
- 5 m PVC hose – for water connection, with a quick connector for easy tap connection
- 2 m silicone hose – for distillate collection, safe for contact with alcohol
- 1/2 inch ball valve – for the 60 L container
- Tri-Clamp clamps and gaskets (2 pcs.)
- Stainless steel filling (24 pcs.)
- Copper filling 0.5 L
- Sealing Teflon tape
- User manual
- Heater with a total power of 3500 W, consisting of two heaters powered by independent cables – one with a power of 2000 W and the other 1500 W.
Container:
- 4 carrying handles
- 6 snap clamps
- Lid with built-in silicone gasket
- Rigid dome lid with an opening for column mounting
- Hole in the container wall for thermometer probe and heater
- Socket for drain valve and matching ball valve for installation
- Tank insulation (neoprene)
Catalyst:
- Module height: 24 cm
- Outer diameter of the module pipe: 60.3 mm
- Ends with Tri-Clamp connectors
- Possibility of using filling
- Recommended copper filling
- Filling capacity: 0.6 L
Module with condenser and "Cold Fingers" reflux:
- Height: 100 cm
- Outer diameter of the pipe: 60.3 mm
- Ends with a Tri-Clamp connector
- 6 "cold fingers" (made of a 10 mm tube)
- Filling part capacity: 2 L
Head with condenser:
- Cooling part height: 25 cm
- Outer diameter of the pipe: 60.3 mm
- Pipe connecting the column with the head diameter: 18 mm
- Water connection - welded into the condenser pipe: 10 mm
- Thermometer inlet
The upper part of the head includes a space for a thermometer probe, allowing for direct monitoring of vapor temperatures throughout the distillation process.
Distiller dimensions (when assembled):
- Height: 192 cm
- Front width: 51 cm
- Side width: 44 cm
Note! Before use, it is essential to read the included instructions and guidelines for use, cleaning, and maintenance. Following these recommendations will ensure long, effective, and safe operation of the distiller.
CAUTION!
Every country has its own legal regulations governing the manufacturing of ethyl alcohol, wine products, and spirits, introducing them onto the market, and regarding sanctions for non-compliance.
Read more
